Position:

Global grain  >  Enterprise dynamics >

The common fault of the corn dryer in use process

Source:Global grainRelease time:2015-09-25 10:10:14

In recent years, our country corn dryer technology constantly breakthroughs, relatively mature, meet the needs of the domestic market. Corn dryer for resources to reduce the phenomenon, the domestic made a long-term energy science and technology development strategy and development planning. Corn dryer using the stream of high-speed material suspended fluidized state, use spray adhesive solution, drying, forming liquid bridge, make the fluidization powder forming porous particles. The closed negative pressure operation of the corn drying machine is working, the entire device inside and outside the surface is bright and clean, no dead Angle, easy to clean.

Corn drying machine is mainly used for drying, rice, corn and wheat with improved can also be used for drying rapeseed crops. Corn dryer by coal stove, electric motor, axial flow fan and stacking rack and other major parts. Small corn dryer work when the motor driving the high-speed rotating impeller of axial flow fan and the hot air from the burning of coal stove by every wind plate upper suction fan, when the mixture through the stack frame of the valley floor, side make the millet temperature increasing, a millet gradually dried away a large amount of water vapor. The temperature of the mixture can be cover by temperature, temperature control board opening Angle different to adjust.

With the rapid development of domestic technology of corn dryer, the developed high-performance, high efficient environmental protection, can meet various needs of different users. Corn dryer to high quality, uniform quickly and is not affected by external factors, to do the drying of the highest quality. Corn dryer has good sealing performance, make the amount of air leakage into the can reduce to a minimum extent. Corn dryer should be studied in structure design and consideration: wear parts should be small, use cycle. Two seal of corn dryer, air temperature, dust, and lubrication is difficult, so the friction surface is easy to wear.

In order to improve the use of sealing device cycle, reduce wear and tear, this request do: corn dryer in shape design, to avoid a dust collecting place; On the material requirement ability of high temperature, wear resistance; Attention on the lubrication, reliable, prevent leakage of lubricating oil; Corn dryer in structure, simple and easy to manufacture and convenient maintenance and so on.

The emergence of corn dryer for many farmers friends solve the problem of grain drying and storage, let many farmers friends free from the heavy farm work, corn dryer drying effect its high efficiency and energy saving environmental protection and to help farmers reduce may cause the loss of the drying process. Small corn dryer short drying time save labor costs, at a time by drying can reduce the water content of 6% 8%, the drying temperature is easy is easy to adjust.

Corn dryer a link has realized mechanization, automation, and the application of corn drying machine production line, is to let our development belt to a peak in the industry, the common fault of the corn dryer in use:

(1) set up the monitoring machine in a dry state can be observed the location of the cameras, then drying condition timely passed to the control room monitoring machine, make the operator grasps the drying condition, failure can be found in a timely manner:

(2) the corn dryer using air pressure or compound dryer this dryers with air dryer and dryer is the dual function of pressure and driving pressure of high-pressure pump haven't reached dry with compressed air drying, with high-pressure pump to stop the compressed air in normal working conditions. Corn dryer, drying not for some reason geomagnetic also take this approach to prevent the wet material, this method is additional means to deal with failure.

(3) the quick opening structure of corn dryer dryers adopt the method of system positioning, without any tools can be very convenient in a flash dryer installation components, not only easy to operate, and the fault save a lot of time for processing.

More information on grain dryer, also please continue to focus on our official website, global food machine net: http://www.worldlj.com

Shared:0

010-56268093

Scanning

Sun Manager:13520642629(Mobile/WeChat) QQ:2926794671 Area:Jiangsu, Zhejiang, Gansu, Xinjiang, Tianjin, Shanghai

Click to communicate with me

Wei Manager:13552598995(Mobile/WeChat) QQ:736936652 Area: Hubei, Qinghai, Guizhou, Neimeng, Guangxi, Ningxia, Hunan

Click to communicate with me

Wang Manager:15311291834(Mobile/WeChat) QQ:728246949 Area: Jiangxi, Sichuan, Shanxi, Yunnan, Chongqing, Fujian, Anhui

Click to communicate with me

Li Manager:18101383259(Mobile/WeChat) QQ:1606650298 Area: Shandong, Beijing, Tibet, Guangdong, Hainan, Shaanxi

Click to communicate with me

Wang Manager:15313137632(Mobile/WeChat) QQ:3213739617 Area: Henan, Hebei, Jilin, Heilongjiang, Liaoning

Click to communicate with me

Our vision

Most popular investment site!

Our mission

Promote the development of food industry!

Our slogan

To find ways to succeed,to find an excuse to fail!

Our philosophy

All to customer value!

Our goal

Do the best Global grain,Investment is more simple!

Partner

Links

Copyright Global grain-www.worldlj.com Copy Right 2010-2015 Telecommunications and information services business licenseJing ICP 15007387 -2

The station is to provide professional foodstuff machinery, food machinery, grain and oil machinery, food conveyor, grain silo, grain drying machine, foodstuff machinery accessories, such as network platform and business directory

This station only has the information platform function, does not take any responsibility for the transaction, please take care of the transaction, in order to make sure that your rights and interests.

Any unit and individual shall not publish false.

Close
Close